Used plasma cutting system

For More Informaion on this cutting system, please contact:

 
Desert Machine Tool Repair

Mike Rowley  480-226-3128

miker@desertmachinetool.com

Koike Aronson, MasterGraph 1500 SS Coordinate Drive Gantry Cutting Machine

 

 

Koike Aronson, MasterGraph 1500 SS Coordinate Drive Gantry Cutting Machine

Standard Right Hand Cut

Heavy Duty structural tube cross beam design

Rear delta bracing for increased rigidity

Extra Long (56”) “Y” axis drive truck with fore/aft side guide rollers for precise motion

Single Side Rack and pinion “Y” axis drive

Rack and pinion “X” axis drive master carriage

Steel band, slave carriage drive

“X” axis cable carrier

Hi-Lo gas control and manifolds with preheat solenoids for four (4) ovyfuel torch stations Centralized control station with gas/plasma process and manual direction /speed controls

Raise/lower switches for four(4) oxy-fuel and one(1) Plasma torch stations plus all up

HL-84A (Northruop Grumman) drive packge, 4 to 236 IPM

 

Effective Cutting Length:  162 inches

Effective Cutting Width: 60inches

Rail Gauge: 86.61 (2200mm)

Input Power : 115v single phase, 60hz, 25 amps

 

Air Conditioning on Control

 

Hybrid D80 PLUS Shape Cutting Control Package w/ interface by Hypertherm Automation on Koike Aronson

PC based 433 MHz Processor6.1 GB hard drive 3.5” floppy drive

64 MEG RAM, 10.4” color Dual Scan LCD display

Forty (40) pre-programmed basic shapes

Full color graphics of all shapes including downloaded and standard shapes

Optically isolated serial port, capable of 115K baud

Shape Wizard (creates customer designed shapes)

Multiple (selectable) lost cut recovery options

Automatic part/plate alignment feature

Standard RS-232C  I/O port for upload/download

Mirror, repeat, rotate, and scale program features

Kerf compensation and programmable scrap allowance

EIA RS-274D or ESSI MDI/DNC program format (ASCII characters)

Transmission isolation for plasma /DNC link

Oxy-Fuel/plasma process interface logic

 

10.4 Inch Color TFT Screen Upgrade

 

Motorized Plasma Torch Station, Master Carriage, heavy duty and plasma interface

 

Command TC Torch Height Control by Hypertherm

For Use with all CNC controls

Raise/Lower stroke, 8 inches programmable up to 200ipm

Initial height positioning, adjustable stroke retract between cuts and positioning resolution of 0.001 inch

Remote pendant for parameter settings of the THC

Mounting package, interconnecting cables & torch clamp

 

Collision Detection Mount

Mounting package with integral breakaway clamp for collision detection &system shutdown

 

Auto Ease-On Cutting Oxygen Control Valve with dome regulator for control piercing For use with Hi_Lo Gas System

 

Pulsed Torch Ignition Basic, per machine

 

Pulse Ignitor Assembly, per torch station

 

Oxy-fuel Torch System Slave Carriage

Model “G” motorized lifter, 6 inch stroke at 140 IPM

Fuel, preheat and cutting oxygen hoses

Machine torch with three(3)cutting tips

Individual Gas Control Solenoids, per torch station

Preheat and cutting oxygen solenoids

Provides on/off control to torch from control panel

 

Hypertherm MAX200 Plasma System